Capture report: `first-contact.jsonl`
1174 updates, 181 distinct keys, 16.3 s. Generated by bebop-2 describe; identifiers redacted.
Rate is updates per second over the capture. once means the value arrived a single time,
normally as part of the AllStates/AllSettings dump. Bebop 2 support comes from the XML support field.
ardrone3.AccessoryState
Section titled “ardrone3.AccessoryState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
ConnectedAccessories_accessory_type |
'flir' |
once | no | Accessory type Parrot Sequoia (multispectral camera for agriculture) FLIR camera (thermal+rgb camera) flir: FLIR camera (thermal+rgb camera) [enum] |
ConnectedAccessories_id |
255 |
once | no | Id of the accessory for the session. [u8] |
ConnectedAccessories_list_flags |
4 |
once | no | List entry attribute Bitfield. 0x01: First: indicate it’s the first element of the list. 0x02: Last: indicate it’s the last element of the list. 0x04: Empty: indicate the list is empty (implies First/Last). All other arguments should be ignored. 0x08: Remove: This value should be removed from the existing list. [u8] |
ConnectedAccessories_swVersion |
'' |
once | no | Software Version of the accessory. [string] |
ConnectedAccessories_uid |
'' |
once | no | Unique Id of the accessory. This id is unique by accessory_type. [string] |
ardrone3.AntiflickeringState
Section titled “ardrone3.AntiflickeringState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
electricFrequencyChanged_frequency |
'fiftyHertz' |
once | yes | Type of the electric frequency Electric frequency of the country is 50hz Electric frequency of the country is 60hz fiftyHertz: Electric frequency of the country is 50hz [enum] |
modeChanged_mode |
'auto' |
once | yes | Mode of the anti flickering functionnality Anti flickering based on the electric frequency previously sent Anti flickering based on a fixed frequency of 50Hz Anti flickering based on a fixed frequency of 60Hz auto: Anti flickering based on the electric frequency previously sent [enum] |
ardrone3.Camera
Section titled “ardrone3.Camera”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
OrientationV2_pan |
0 |
once | yes | Pan camera consign for the drone (in degree) The value is saturated by the drone. Saturation value is sent by thre drone through CameraSettingsChanged command. [float] (2 definitions share this name) |
OrientationV2_tilt |
-13 |
once | yes | Tilt camera consign for the drone (in degree) The value is saturated by the drone. Saturation value is sent by thre drone through CameraSettingsChanged command. [float] (2 definitions share this name) |
Orientation_pan |
0 |
5.0/s | yes | Pan camera consign for the drone (in degree) The value is saturated by the drone. Saturation value is sent by thre drone through CameraSettingsChanged command. [i8] deprecated (2 definitions share this name) |
Orientation_tilt |
-13 |
5.0/s | yes | Tilt camera consign for the drone (in degree) The value is saturated by the drone. Saturation value is sent by thre drone through CameraSettingsChanged command. [i8] deprecated (2 definitions share this name) |
ardrone3.CameraState
Section titled “ardrone3.CameraState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
VelocityRange_max_pan |
20 |
once | yes | Absolute max pan velocity [deg/s] [float] |
VelocityRange_max_tilt |
20 |
once | yes | Absolute max tilt velocity [deg/s] [float] |
defaultCameraOrientationV2_pan |
0 |
once | yes | Pan value [deg] [float] |
defaultCameraOrientationV2_tilt |
-13 |
once | yes | Tilt value [deg] [float] |
defaultCameraOrientation_pan |
0 |
once | yes | Pan value (in degree) [i8] deprecated |
defaultCameraOrientation_tilt |
-13 |
once | yes | Tilt value (in degree) [i8] deprecated |
ardrone3.GPSSettingsState
Section titled “ardrone3.GPSSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
GPSFixStateChanged_fixed |
0 |
once | yes | 1 if gps on drone is fixed, 0 otherwise [u8] |
HomeChanged_altitude |
500 |
once | yes | Home altitude in meters [double] |
HomeChanged_latitude |
500 |
once | yes | Home latitude in decimal degrees [double] |
HomeChanged_longitude |
500 |
once | yes | Home longitude in decimal degrees [double] |
HomeTypeChanged_type |
'FOLLOWEE' |
0.1/s | yes | The type of the home position The drone will try to return to the take off position The drone will try to return to the pilot position The drone will try to return to the target of the current (or last) follow me FOLLOWEE: The drone will try to return to the target of the current (or last) follow me [enum] |
ReturnHomeDelayChanged_delay |
30 |
once | yes | Delay in second [u16] |
ReturnHomeMinAltitudeChanged_max |
150 |
once | n/s | Upper bound in meters, relative to take off altitude. [float] |
ReturnHomeMinAltitudeChanged_min |
20 |
once | n/s | Lower bound in meters, relative to take off altitude. [float] |
ReturnHomeMinAltitudeChanged_value |
20 |
once | n/s | Current value in meters, relative to take off altitude. [float] |
ardrone3.GPSState
Section titled “ardrone3.GPSState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
HomeTypeAvailabilityChanged_available |
0 |
0.2/s | yes | 1 if this type is available, 0 otherwise [u8] |
HomeTypeAvailabilityChanged_type |
'FOLLOWEE' (4 distinct) |
0.2/s | yes | The type of the return home The drone has enough information to return to the take off position The drone has enough information to return to the pilot position The drone has not enough information, it will return to the first GPS fix The drone has enough information to return to the target of the current (or last) follow me FOLLOWEE: The drone has enough information to return to the target of the current (or last) follow me [enum] |
HomeTypeChosenChanged_type |
'FIRST_FIX' |
once | yes | The type of the return home chosen The drone will return to the take off position The drone will return to the pilot position In this case, the drone will use the position given by ARDrone3-SendControllerGPS The drone has not enough information, it will return to the first GPS fix The drone will return to the target of the current (or last) follow me In this case, the drone will use the position of the target of the followMe (given by ControllerInfo-GPS) FIRST_FIX: The drone has not enough information, it will return to the first GPS fix [enum] |
ardrone3.MediaRecordState
Section titled “ardrone3.MediaRecordState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
PictureStateChangedV2_error |
'ok' |
once | yes | Error to explain the state No Error Unknown generic error Picture camera is out of order Memory full ; cannot save one additional picture Battery is too low to start/keep recording. ok: No Error [enum] |
PictureStateChangedV2_state |
'ready' |
once | yes | State of device picture recording The picture recording is ready The picture recording is busy The picture recording is not available ready: The picture recording is ready [enum] |
VideoStateChangedV2_error |
'ok' |
once | yes | Error to explain the state No Error Unknown generic error Video camera is out of order Memory full ; cannot save one additional video Battery is too low to start/keep recording. ok: No Error [enum] |
VideoStateChangedV2_state |
'stopped' |
once | yes | State of device video recording Video is stopped Video is started The video recording is not available stopped: Video is stopped [enum] |
ardrone3.MediaStreamingState
Section titled “ardrone3.MediaStreamingState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
VideoEnableChanged_enabled |
'disabled' |
once | yes | Current video streaming status. Video streaming is enabled. Video streaming is disabled. Video streaming failed to start. disabled: Video streaming is disabled. [enum] |
ardrone3.NetworkSettings
Section titled “ardrone3.NetworkSettings”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
wifiSecurity_key |
'' |
once | yes | The key to secure the network (empty if type is open) [string] (2 definitions share this name) |
wifiSecurity_keyType |
'plain' |
once | yes | Type of the key Key is plain text, not encrypted plain: Key is plain text, not encrypted [enum] (2 definitions share this name) |
wifiSecurity_type |
'open' |
once | yes | The type of wifi security (open, wpa2) Wifi is not protected by any security (default) Wifi is protected by wpa2 open: Wifi is not protected by any security (default) [enum] (2 definitions share this name) |
ardrone3.NetworkSettingsState
Section titled “ardrone3.NetworkSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
WifiSelectionChanged_band |
'2_4ghz' |
once | yes | The actual wifi band state 2.4 GHz band 5 GHz band Both 2.4 and 5 GHz bands 2_4ghz: 2.4 GHz band [enum] |
WifiSelectionChanged_channel |
10 |
once | yes | The channel (depends of the band) [u8] |
WifiSelectionChanged_type |
'auto_2_4ghz' |
once | yes | The type of wifi selection settings Auto selection Auto selection 2.4ghz Auto selection 5 ghz Manual selection auto_2_4ghz: Auto selection 2.4ghz [enum] |
wifiSecurityChanged_type |
'open' |
once | n/s | The type of wifi security (open, wpa2) Wifi is not protected by any security (default) Wifi is protected by wpa2 open: Wifi is not protected by any security (default) [enum] deprecated |
ardrone3.PROState
Section titled “ardrone3.PROState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
Features_features |
0 |
once | n/s | Bitfield representing enabled features. [u64] deprecated |
ardrone3.PictureSettingsState
Section titled “ardrone3.PictureSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AutoWhiteBalanceChanged_type |
'auto' |
once | yes | The type auto white balance Auto guess of best white balance params Tungsten white balance Daylight white balance Cloudy white balance White balance for a flash auto: Auto guess of best white balance params [enum] |
ExpositionChanged_max |
1.5 |
once | yes | Max exposure value [float] |
ExpositionChanged_min |
-1.5 |
once | yes | Min exposure value [float] |
ExpositionChanged_value |
0 |
once | yes | Exposure value [float] |
PictureFormatChanged_type |
'snapshot' |
once | yes | The type of photo format Take raw image Take a 4:3 jpeg photo Take a 16:9 snapshot from camera Take jpeg fisheye image only snapshot: Take a 16:9 snapshot from camera [enum] |
SaturationChanged_max |
100 |
once | yes | Max saturation value [float] |
SaturationChanged_min |
-100 |
once | yes | Min saturation value [float] |
SaturationChanged_value |
0 |
once | yes | Saturation value [float] |
TimelapseChanged_enabled |
0 |
0.1/s | yes | 1 if timelapse is enabled, 0 otherwise [u8] |
TimelapseChanged_interval |
1 |
0.1/s | yes | interval in seconds for taking pictures [float] |
TimelapseChanged_maxInterval |
300 |
0.1/s | yes | Maximal interval for taking pictures [float] |
TimelapseChanged_minInterval |
1 |
0.1/s | yes | Minimal interval for taking pictures [float] |
VideoAutorecordChanged_enabled |
1 |
once | yes | 1 if video autorecord is enabled, 0 otherwise [u8] |
VideoAutorecordChanged_mass_storage_id |
0 |
once | yes | Mass storage id for the taken video [u8] |
VideoFramerateChanged_framerate |
'30_FPS' |
0.1/s | yes | Video framerate 23.976 frames per second. 25 frames per second. 29.97 frames per second. 30_FPS: 29.97 frames per second. [enum] |
VideoRecordingModeChanged_mode |
'quality' |
0.1/s | yes | Video recording mode Maximize recording quality. Maximize recording time. quality: Maximize recording quality. [enum] |
VideoResolutionsChanged_type |
'rec1080_stream480' |
0.1/s | yes | Video resolution type. 1080p recording, 480p streaming. 720p recording, 720p streaming. rec1080_stream480: 1080p recording, 480p streaming. [enum] |
VideoStabilizationModeChanged_mode |
'roll_pitch' |
once | yes | Video stabilization mode Video flat on roll and pitch Video flat on pitch only Video flat on roll only Video follows drone angles roll_pitch: Video flat on roll and pitch [enum] |
ardrone3.PilotingSettingsState
Section titled “ardrone3.PilotingSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
BankedTurnChanged_state |
0 |
once | yes | 1 if enabled, 0 if disabled [u8] |
MaxAltitudeChanged_current |
30 |
once | yes | Current altitude max [float] |
MaxAltitudeChanged_max |
150 |
once | yes | Range max of altitude [float] |
MaxAltitudeChanged_min |
0.5 |
once | yes | Range min of altitude [float] |
MaxDistanceChanged_current |
2000 |
once | yes | Current max distance in meter [float] |
MaxDistanceChanged_max |
2000 |
once | yes | Maximal possible max distance [float] |
MaxDistanceChanged_min |
10 |
once | yes | Minimal possible max distance [float] |
MaxTiltChanged_current |
8 |
once | yes | Current max tilt [float] |
MaxTiltChanged_max |
35 |
once | yes | Range max of tilt [float] |
MaxTiltChanged_min |
5 |
once | yes | Range min of tilt [float] |
MotionDetection_enabled |
1 |
once | yes | 1 if motion detection is enabled, 0 otherwise. [u8] |
NoFlyOverMaxDistanceChanged_shouldNotFlyOver |
0 |
once | yes | 1 if the drone won’t fly further than max distance, 0 if no limitation on the drone will be done [u8] |
ardrone3.PilotingState
Section titled “ardrone3.PilotingState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AlertStateChanged_state |
'none' |
once | yes | Drone alert state No alert User emergency alert Cut out alert Critical battery alert Low battery alert The angle of the drone is too high none: No alert [enum] |
AltitudeChanged_altitude |
0 |
4.9/s | yes | Altitude in meters [double] |
AttitudeChanged_pitch |
-0.0132332 (range -0.01361 to -0.01295) |
4.9/s | yes | Pitch value (in radian) [float] |
AttitudeChanged_roll |
0.0652691 (range 0.06486 to 0.06595) |
4.9/s | yes | roll value (in radian) [float] |
AttitudeChanged_yaw |
-1.32246 (range -1.323 to -1.322) |
4.9/s | yes | Yaw value (in radian) [float] |
FlyingStateChanged_state |
'landed' |
once | yes | Drone flying state Landed state Taking off state Hovering / Circling (for fixed wings) state Flying state Landing state Emergency state User take off state. Waiting for user action to take off. Motor ramping state. Emergency landing state. Drone autopilot has detected defective sensor(s). Only Yaw argument in PCMD is taken into account. All others flying commands are ignored. landed: Landed state [enum] |
GpsLocationChanged_altitude |
500 |
2.0/s | yes | Altitude location in meters. [double] |
GpsLocationChanged_altitude_accuracy |
-61 (range -124 to 113) |
2.0/s | yes | Altitude location error in meters (1 sigma/standard deviation) -1 if not available. [i8] |
GpsLocationChanged_latitude |
500 |
2.0/s | yes | Latitude location in decimal degrees (500.0 if not available) [double] |
GpsLocationChanged_latitude_accuracy |
116 (range -120 to 116) |
2.0/s | yes | Latitude location error in meters (1 sigma/standard deviation) -1 if not available. [i8] |
GpsLocationChanged_longitude |
500 |
2.0/s | yes | Longitude location in decimal degrees (500.0 if not available) [double] |
GpsLocationChanged_longitude_accuracy |
97 (range -123 to 119) |
2.0/s | yes | Longitude location error in meters (1 sigma/standard deviation) -1 if not available. [i8] |
MotionState_state |
'steady' |
once | yes | Motion state Drone is steady Drone is moving steady: Drone is steady [enum] |
NavigateHomeStateChanged_reason |
'disabled' |
once | yes | Reason of the state User requested a navigate home (available->inProgress) Connection between controller and product lost (available->inProgress) Low battery occurred (available->inProgress) Navigate home is finished (inProgress->available) Navigate home has been stopped (inProgress->available) Navigate home disabled by product (inProgress->unavailable or available->unavailable) Navigate home enabled by product (unavailable->available) disabled: Navigate home disabled by product (inProgress->unavailable or available->unavailable) [enum] |
NavigateHomeStateChanged_state |
'unavailable' |
once | yes | State of navigate home Navigate home is available Navigate home is in progress Navigate home is not available Navigate home has been received, but its process is pending unavailable: Navigate home is not available [enum] |
PilotedPOI_altitude |
500 |
once | yes | Altitude above take off point (in m) to look at. This information is only valid when the state is pending or running. [double] deprecated |
PilotedPOI_latitude |
500 |
once | yes | Latitude of the location (in degrees) to look at. This information is only valid when the state is pending or running. [double] deprecated |
PilotedPOI_longitude |
500 |
once | yes | Longitude of the location (in degrees) to look at. This information is only valid when the state is pending or running. [double] deprecated |
PilotedPOI_status |
'UNAVAILABLE' |
once | yes | Status of the Piloted POI The piloted POI is not available The piloted POI is available Piloted POI has been requested. Waiting to be in state that allow the piloted POI to start Piloted POI is running UNAVAILABLE: The piloted POI is not available [enum] deprecated |
PositionChanged_altitude |
500 |
1.0/s | yes | Altitude in meters (from GPS) [double] |
PositionChanged_latitude |
500 |
1.0/s | yes | Latitude position in decimal degrees (500.0 if not available) [double] |
PositionChanged_longitude |
500 |
1.0/s | yes | Longitude position in decimal degrees (500.0 if not available) [double] |
SpeedChanged_speedX |
0 |
4.9/s | yes | Speed relative to the North (when drone moves to the north, speed is > 0) (in m/s) [float] |
SpeedChanged_speedY |
0 |
4.9/s | yes | Speed relative to the East (when drone moves to the east, speed is > 0) (in m/s) [float] |
SpeedChanged_speedZ |
0 |
4.9/s | yes | Speed on the z axis (when drone moves down, speed is > 0) (in m/s) [float] |
moveToChanged_altitude |
500 |
once | yes | Altitude above take off point (in m) to reach [double] |
moveToChanged_heading |
0 |
once | yes | Heading (relative to the North in degrees). This value is only used if the orientation mode is HEADING_START or HEADING_DURING [float] |
moveToChanged_latitude |
500 |
once | yes | Latitude of the location (in degrees) to reach [double] |
moveToChanged_longitude |
500 |
once | yes | Longitude of the location (in degrees) to reach [double] |
moveToChanged_orientation_mode |
'NONE' |
once | yes | Orientation mode of the move to The drone won’t change its orientation The drone will make a rotation to look in direction of the given location The drone will orientate itself to the given heading before moving to the location The drone will orientate itself to the given heading while moving to the location NONE: The drone won’t change its orientation [enum] |
moveToChanged_status |
'DONE' |
once | yes | Status of the move to The drone is actually flying to the given position The drone has reached the target The move to has been canceled, either by a CancelMoveTo command or when a disconnection appears. The move to has not been finished or started because of an error. DONE: The drone has reached the target [enum] |
ardrone3.SettingsState
Section titled “ardrone3.SettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
CPUID_id |
<redacted> |
once | n/s | Product main cpu id [string] |
MotorErrorLastErrorChanged_motorError |
'noError' |
once | yes | Enumeration of the motor error No error detected EEPROM access failure Motor stalled Propeller cutout security triggered Communication with motor failed by timeout RC emergency stop Motor controler scheduler real-time out of bounds One or several incorrect values in motor settings Battery voltage out of bounds Incorrect number of LIPO cells Defectuous MOSFET or broken motor phases Too hot or too cold Cypress temperature Not use for BLDC but useful for HAL Error Made by BLDC_ASSERT() noError: No error detected [enum] |
MotorErrorStateChanged_motorError |
'noError' |
once | yes | Enumeration of the motor error No error detected EEPROM access failure Motor stalled Propeller cutout security triggered Communication with motor failed by timeout RC emergency stop Motor controler scheduler real-time out of bounds One or several incorrect values in motor settings Too hot or too cold Cypress temperature Battery voltage out of bounds Incorrect number of LIPO cells Defectuous MOSFET or broken motor phases Not use for BLDC but useful for HAL Error Made by BLDC_ASSERT() noError: No error detected [enum] |
MotorErrorStateChanged_motorIds |
0 |
once | yes | Bit field for concerned motor. If bit 0 = 1, motor 1 is affected by this error. Same with bit 1, 2 and 3. Motor 1: front left Motor 2: front right Motor 3: back right Motor 4: back left [u8] |
MotorFlightsStatusChanged_lastFlightDuration |
20 |
once | yes | Duration of the last flight (in seconds) [u16] |
MotorFlightsStatusChanged_nbFlights |
48 |
once | yes | total number of flights [u16] |
MotorFlightsStatusChanged_totalFlightDuration |
7946 |
once | yes | Duration of all flights (in seconds) [u32] |
MotorSoftwareVersionChanged_version |
'6.7.R.4' |
once | n/s | name of the version : dot separated fields (major version - minor version - firmware type - nb motors handled). Firmware types : Release, Debug, Alpha, Test-bench [string] deprecated |
P7ID_serialID |
<redacted> |
once | n/s | Product P7ID [string] deprecated |
ProductGPSVersionChanged_hardware |
'' |
once | yes | Product GPS hardware version [string] |
ProductGPSVersionChanged_software |
'3.01F' |
once | yes | Product GPS software version [string] |
ardrone3.SoundState
Section titled “ardrone3.SoundState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AlertSound_state |
'stopped' |
once | no | State of the alert sound Alert sound is not playing Alert sound is playing stopped: Alert sound is not playing [enum] |
ardrone3.SpeedSettingsState
Section titled “ardrone3.SpeedSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
HullProtectionChanged_present |
0 |
once | yes | 1 if present, 0 if not present [u8] |
MaxPitchRollRotationSpeedChanged_current |
80 |
once | yes | Current max pitch/roll rotation speed in degree/s [float] |
MaxPitchRollRotationSpeedChanged_max |
300 |
once | yes | Range max of pitch/roll rotation speed [float] |
MaxPitchRollRotationSpeedChanged_min |
80 |
once | yes | Range min of pitch/roll rotation speed [float] |
MaxRotationSpeedChanged_current |
13 |
once | yes | Current max yaw rotation speed in degree/s [float] |
MaxRotationSpeedChanged_max |
200 |
once | yes | Range max of yaw rotation speed [float] |
MaxRotationSpeedChanged_min |
10 |
once | yes | Range min of yaw rotation speed [float] |
MaxVerticalSpeedChanged_current |
1 |
once | yes | Current max vertical speed in m/s [float] |
MaxVerticalSpeedChanged_max |
6 |
once | yes | Range max of vertical speed [float] |
MaxVerticalSpeedChanged_min |
0.5 |
once | yes | Range min of vertical speed [float] |
OutdoorChanged_outdoor |
1 |
once | n/s | 1 if outdoor flight, 0 if indoor flight [u8] deprecated |
common.ARLibsVersionsState
Section titled “common.ARLibsVersionsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
DeviceLibARCommandsVersion_version |
'4.0.0.4' |
once | n/s | version of libARCommands (“1.2.3.4” format) [string] |
common.CalibrationState
Section titled “common.CalibrationState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
MagnetoCalibrationAxisToCalibrateChanged_axis |
'none' |
once | yes | The axis to calibrate If the current calibration axis should be the x axis If the current calibration axis should be the y axis If the current calibration axis should be the z axis If none of the axis should be calibrated none: If none of the axis should be calibrated [enum] |
MagnetoCalibrationRequiredState_required |
0 |
0.1/s | yes | 1 if calibration is required, 0 if current calibration is still valid [u8] |
MagnetoCalibrationStartedChanged_started |
0 |
once | yes | 1 if calibration has started, 0 otherwise [u8] |
common.CameraSettingsState
Section titled “common.CameraSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
CameraSettingsChanged_fov |
78 |
once | yes | Value of the camera horizontal fov (in degree) [float] |
CameraSettingsChanged_panMax |
35 |
once | yes | Value of max pan (right pan) (in degree) [float] |
CameraSettingsChanged_panMin |
-35 |
once | yes | Value of min pan (left pan) (in degree) [float] |
CameraSettingsChanged_tiltMax |
17 |
once | yes | Value of max tilt (top tilt) (in degree) [float] |
CameraSettingsChanged_tiltMin |
-83 |
once | yes | Value of min tilt (bottom tilt) (in degree) [float] |
common.CommonState
Section titled “common.CommonState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AllStatesChanged |
True |
once | yes | All states have been sent |
BatteryStateChanged_percent |
100 |
once | yes | Battery percentage [u8] |
DeprecatedMassStorageContentChanged_mass_storage_id |
0 |
once | n/s | Mass storage id (unique) [u8] deprecated |
DeprecatedMassStorageContentChanged_nbCrashLogs |
0 |
once | n/s | Number of crash logs [u16] deprecated |
DeprecatedMassStorageContentChanged_nbPhotos |
0 |
once | n/s | Number of photos (does not include raw photos) [u16] deprecated |
DeprecatedMassStorageContentChanged_nbPuds |
0 |
once | n/s | Number of puds [u16] deprecated |
DeprecatedMassStorageContentChanged_nbVideos |
0 |
once | n/s | Number of videos [u16] deprecated |
MassStorageContentForCurrentRun_mass_storage_id |
0 |
once | yes | Mass storage id (unique) [u8] |
MassStorageContentForCurrentRun_nbPhotos |
0 |
once | yes | Number of photos (does not include raw photos) [u16] |
MassStorageContentForCurrentRun_nbRawPhotos |
0 |
once | yes | Number of raw photos [u16] |
MassStorageContentForCurrentRun_nbVideos |
0 |
once | yes | Number of videos [u16] |
MassStorageContent_mass_storage_id |
0 |
once | yes | Mass storage id (unique) [u8] |
MassStorageContent_nbCrashLogs |
0 |
once | yes | Number of crash logs [u16] |
MassStorageContent_nbPhotos |
0 |
once | yes | Number of photos (does not include raw photos) [u16] |
MassStorageContent_nbPuds |
0 |
once | yes | Number of puds [u16] |
MassStorageContent_nbRawPhotos |
0 |
once | yes | Number of raw photos [u16] |
MassStorageContent_nbVideos |
0 |
once | yes | Number of videos [u16] |
MassStorageInfoStateListChanged_full |
0 |
once | yes | Mass storage full information state (1 if mass storage full, 0 otherwise). [u8] |
MassStorageInfoStateListChanged_internal |
1 |
once | yes | Mass storage internal type state (1 if mass storage is internal, 0 otherwise) [u8] |
MassStorageInfoStateListChanged_mass_storage_id |
0 |
once | yes | Mass storage state id (unique) [u8] |
MassStorageInfoStateListChanged_plugged |
1 |
once | yes | Mass storage plugged (1 if mass storage is plugged, otherwise 0) [u8] |
MassStorageInfoStateListChanged_size |
7338 |
once | yes | Mass storage size in MBytes [u32] |
MassStorageInfoStateListChanged_used_size |
16 |
once | yes | Mass storage used size in MBytes [u32] |
MassStorageStateListChanged_mass_storage_id |
0 |
once | yes | Mass storage id (unique) [u8] |
MassStorageStateListChanged_name |
'internal' |
once | yes | Mass storage name [string] |
SensorsStatesListChanged_sensorName |
'vertical_camera' (6 distinct) |
0.4/s | yes | Sensor name Inertial Measurement Unit sensor Barometer sensor Ultrasonic sensor GPS sensor Magnetometer sensor Vertical Camera sensor vertical_camera: Vertical Camera sensor [enum] |
SensorsStatesListChanged_sensorState |
1 |
0.4/s | yes | Sensor state (1 if the sensor is OK, 0 if the sensor is NOT OK) [u8] |
VideoRecordingTimestamp_startTimestamp |
7 |
once | n/s | Timestamp in milliseconds since 00:00:00 UTC on 1 January 1970. [u64] |
VideoRecordingTimestamp_stopTimestamp |
7 |
once | n/s | Timestamp in milliseconds since 00:00:00 UTC on 1 January 1970. 0 mean that video is still recording. [u64] |
WifiSignalChanged_rssi |
-23 (range -23 to -20) |
0.8/s | yes | RSSI of the signal between controller and the product (in dbm) [i16] |
common.FlightPlanState
Section titled “common.FlightPlanState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AvailabilityStateChanged_AvailabilityState |
0 |
once | yes | Running a flightPlan file is available (1 running a flightPlan file is available, otherwise 0) [u8] |
ComponentStateListChanged_State |
1 (range 0 to 1) |
0.2/s | yes | State of the FlightPlan component (1 FlightPlan component OK, otherwise 0) [u8] |
ComponentStateListChanged_component |
'TakeOff' (4 distinct) |
0.2/s | yes | Drone FlightPlan component id (unique) Drone GPS component. State is 0 when the drone needs a GPS fix. Drone Calibration component. State is 0 when the sensors of the drone needs to be calibrated. Mavlink file component. State is 0 when the mavlink file is missing or contains error. Drone Take off component. State is 0 when the drone cannot take-off. Component for waypoints beyond the geofence. State is 0 when one or more waypoints are beyond the geofence. Drone camera component. State is 0 when the drone needs to wait camera availability. TakeOff: Drone Take off component. State is 0 when the drone cannot take-off. [enum] |
common.MavlinkState
Section titled “common.MavlinkState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
MavlinkFilePlayingStateChanged_filepath |
'/data/ftp/internal_000/flightplans/flightPlan.mavlink' |
once | yes | flight plan file path from the mavlink ftp root [string] |
MavlinkFilePlayingStateChanged_state |
'stopped' |
once | yes | State of the mavlink Mavlink file is playing Mavlink file is stopped (arg filepath and type are useless in this state) Mavlink file is paused Mavlink file is loaded (it will be played at take-off) stopped: Mavlink file is stopped (arg filepath and type are useless in this state) [enum] |
MavlinkFilePlayingStateChanged_type |
'flightPlan' |
once | yes | type of the played mavlink file Mavlink file for FlightPlan Mavlink file for MapMyHouse flightPlan: Mavlink file for FlightPlan [enum] |
common.RunState
Section titled “common.RunState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
RunIdChanged_runId |
'' |
once | yes | Id of the run [string] |
common.SettingsState
Section titled “common.SettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
AllSettingsChanged |
True |
once | yes | All settings have been sent |
AutoCountryChanged_automatic |
1 |
once | yes | Boolean : 0 : Manual / 1 : Auto [u8] |
CountryChanged_code |
'US' |
once | yes | Country code with ISO 3166 format, empty string means unknown country. [string] |
ProductNameChanged_name |
'Bebop2-XXXXXX' |
once | yes | Product name [string] |
ProductSerialHighChanged_high |
<redacted> |
once | yes | Serial high number (hexadecimal value) [string] |
ProductSerialLowChanged_low |
<redacted> |
once | yes | Serial low number (hexadecimal value) [string] |
ProductVersionChanged_hardware |
'HW_03' |
once | yes | Product hardware version [string] |
ProductVersionChanged_software |
'4.7.1' |
once | yes | Product software version [string] |
common.WifiSettingsState
Section titled “common.WifiSettingsState”| key | value | seen | B2 | meaning |
|---|---|---|---|---|
outdoorSettingsChanged_outdoor |
1 |
once | yes | 1 if it should use outdoor wifi settings, 0 otherwise [u8] |
Comments
Spotted a mistake, or tried this on your own Bebop? Leave a note. Comments are kept on this site's own server.